1835 New Natchitoches Road
West Monroe, Louisiana 71292
888-218-7227
Fax (318) 812-0088
info@maskcoat.com
West Monroe, Louisiana 71292
888-218-7227
Fax (318) 812-0088
info@maskcoat.com
MASKING PRODUCT
PEELSEAL TECHNICAL DATA SHEET
PEELSEAL is a fast dry solvent stop-off lacquer or liquid maskant that can
be applied over a clean surface by brushing, dipping or spray to the surface
to be masked. PEELSEAL can be used in most plating cycles. For certain
process requirements additional coats may be applied after solvent flash
off. Under normal ambient conditions parts can enter the plating cycle
within one hour after application. Peelseal with a viscosity of 5000-6000
cps can be applied to a very sharp line.
Peelseal can be removed from nonporous surfaces by simple peeling or
for large quantities of parts it may be stripped by using PEELSEAL
STRIPPER/REDUCER. Use PEELSEAL STRIPPER/REDUCER to thin to spray
viscosity if using spray application. Cure may be accelerated by increasing
ambient temperature. PEELSEAL contains additives to maintain
dimensional stability which require suspension prior to application. Use
care in stirring to avoid introduction of air bubbles. PEELSEAL has an easy
to detect color to readily determine application location, detection of
inadvertent application and completeness of removal. Coverage is about
130 sq. ft/gal at 6 mil dry film thickness.
PEELSEAL is a flammable liquid and is available in 1 gal, 5 gal and 55 gal
containers.
MASKCOAT LLC
 | |  | |  |
